Exponent Rules and Powers Explained

An exponent is shorthand for repeated multiplication. Writing 2⁵ means 2 × 2 × 2 × 2 × 2, and the small raised 5 tells you how many copies of the base to multiply together. The exponent (also called the power or index) turns a long string of multiplications into a compact, readable expression.

A handful of rules govern how exponents combine. Once you know them, you can multiply and divide powers, raise a power to another power, and handle zero and negative exponents without expanding everything out. These same rules are what make scientific notation work, which is how calculators and scientists write very large and very small numbers.

Open the matching Scientific Calculator

Key formula

aᵐ × aⁿ = aᵐ⁺ⁿ • aᵐ ÷ aⁿ = aᵐ⁻ⁿ • (aᵐ)ⁿ = aᵐⁿ • a⁰ = 1 • a⁻ⁿ = 1 ÷ aⁿ

The product and quotient rules

When you multiply powers with the same base, add the exponents: aᵐ × aⁿ = aᵐ⁺ⁿ. So 2³ × 2⁴ = 2³⁺⁴ = 2⁷. The rule makes sense once you expand it: three copies of 2 times four more copies of 2 is seven copies of 2 in total. The base must be the same — 2³ × 3⁴ has no single power answer because the bases differ.

When you divide powers with the same base, subtract the exponents: aᵐ ÷ aⁿ = aᵐ⁻ⁿ. So 2⁵ ÷ 2² = 2⁵⁻² = 2³. Expanded, that is five copies of 2 on top and two on the bottom, which cancel in pairs until three copies remain on top. The quotient rule is also where negative exponents come from, as the next section shows.

Power of a power, and the zero exponent

Raising a power to another power multiplies the exponents: (aᵐ)ⁿ = aᵐⁿ. So (2³)⁴ = 2³ˣ⁴ = 2¹². Expanded, (2³)⁴ means “four copies of 2³”, and each 2³ is three copies of 2, giving twelve copies of 2 in total. This rule is why (x²)³ and x⁶ are the same expression written two ways.

Any non-zero base raised to the power 0 equals 1: a⁰ = 1. This is not an arbitrary definition — it follows from the quotient rule. Since a³ ÷ a³ = 1 (anything divided by itself is 1), the quotient rule gives a³⁻³ = a⁰, so a⁰ must equal 1. The one exception is 0⁰, which is left undefined because the two patterns that produce it disagree.

Negative exponents and scientific notation

A negative exponent means “one over the positive power”: a⁻ⁿ = 1 ÷ aⁿ. So 2⁻³ = 1 ÷ 2³ = 1/8. It does not make the number negative — it makes it a reciprocal. This follows directly from the quotient rule: 2² ÷ 2⁵ = 2²⁻⁵ = 2⁻³, and since 4 ÷ 32 = 1/8, the two agree.

Scientific notation uses these rules to write any number as a power of 10. A number like 3,200 is 3.2 × 10³, and 0.0045 is 4.5 × 10⁻³. Multiplying numbers in scientific notation uses the product rule on the powers of 10: (3 × 10⁴) × (2 × 10⁵) = 6 × 10⁹. The Scientific Calculator handles the caret ^ for powers and the constant × 10ⁿ through normal multiplication, so you can build these expressions directly.

When each rule earns its keep

The product and quotient rules are most useful when an expression has several powers of the same base multiplied or divided, because they collapse the expression without forcing you to evaluate each power first. (2⁵ × 2⁴) ÷ 2⁶ becomes 2³ in one line, instead of computing 32 × 16 ÷ 64.

The power-of-a-power rule is the one that turns up in formulas with nested exponents, such as compound growth applied repeatedly. Recognising (aᵐ)ⁿ as aᵐⁿ keeps the expression compact and avoids evaluating the inner power before raising it again.

Worked example

Simplify (2³ × 2⁵) ÷ 2⁴

  1. 1Apply the product rule inside the brackets: 2³ × 2⁵ = 2³⁺⁵ = 2⁸.
  2. 2Now divide by 2⁴ using the quotient rule: 2⁸ ÷ 2⁴ = 2⁸⁻⁴ = 2⁴.
  3. 3Evaluate: 2⁴ = 16.
  4. 4Check by expanding: (8 × 32) ÷ 16 = 256 ÷ 16 = 16. ✓

Answer: 16

Another worked example

Simplify (x³)² × x⁴ and evaluate when x = 2.

  1. 1Apply the power-of-a-power rule: (x³)² = x³ˣ² = x⁶.
  2. 2Multiply by x⁴ using the product rule: x⁶ × x⁴ = x⁶⁺⁴ = x¹⁰.
  3. 3Evaluate at x = 2: 2¹⁰ = 1024.
  4. 4Check by expanding first: (2³)² × 2⁴ = 8² × 16 = 64 × 16 = 1024. ✓

Answer: x¹⁰, which is 1024 when x = 2.

Another worked example

Write 0.00032 in scientific notation, then multiply it by 2 × 10⁴.

  1. 1Move the decimal point to after the first non-zero digit: 0.00032 = 3.2 × 10⁻⁴ (four places left, so the exponent is −4).
  2. 2Multiply by 2 × 10⁴: (3.2 × 2) × (10⁻⁴ × 10⁴).
  3. 3Product rule on the powers of 10: 10⁻⁴⁺⁴ = 10⁰ = 1.
  4. 4Combine: 6.4 × 1 = 6.4.
  5. 5Check: 0.00032 × 20,000 = 6.4. ✓

Answer: 0.00032 = 3.2 × 10⁻⁴; multiplied by 2 × 10⁴ gives 6.4.

How to read the result

A simplified power expression should still describe the same quantity as the original — fewer factors, same value. If your simplified form gives a different number when you substitute a test base, an exponent rule was applied where it does not fit, most often adding exponents across different bases.

Negative and zero exponents are the rules that surprise people, because they do not behave like multiplication. a⁰ is 1, not 0; a⁻ⁿ is a fraction, not a negative number. Read these two as “what the quotient rule forces” rather than as new facts to memorise, and they stop feeling arbitrary.

Limits of this method

The product, quotient and power-of-a-power rules require the same base. 2³ × 3⁴ cannot be combined into a single power; it must be evaluated as 8 × 81 = 648. The rules combine exponents, not bases.

Fractional exponents such as 8^(1/3) are valid and equal the cube root, but the Scientific Calculator evaluates them numerically rather than simplifying the radical form. For exact radical simplification, work by hand or keep the fractional exponent.

Common mistakes

  • Adding exponents when the bases differ — 2³ × 3⁴ cannot be combined into a single power. Multiply the values out instead.
  • Treating a⁰ as 0 — a⁰ equals 1 for any non-zero base, because aⁿ ÷ aⁿ = 1 and the quotient rule gives a⁰.
  • Confusing a⁻ⁿ with a negative number — 2⁻³ is 1/8, not −8. The negative exponent means reciprocal, not negation.
  • Adding exponents when raising a power to a power — (aᵐ)ⁿ multiplies them (aᵐⁿ), it does not add them.

Frequently asked questions

What does a negative exponent mean?

It means “one over the positive power”. 2⁻³ = 1 ÷ 2³ = 1/8. The result is a positive fraction, not a negative number.

Why is anything to the power 0 equal to 1?

Because aⁿ ÷ aⁿ = 1, and the quotient rule turns that into aⁿ⁻ⁿ = a⁰. The only exception is 0⁰, which is left undefined.

Can I add exponents when multiplying 2³ × 3⁴?

No. The product rule only works when the bases are the same. 2³ × 3⁴ must be evaluated as 8 × 81 = 648.

Does (a + b)² equal a² + b²?

No. (a + b)² = (a + b)(a + b) = a² + 2ab + b². Exponent rules combine powers of the same base, not sums inside brackets — expanding the brackets first is the only safe way.

What is 0⁰?

It is left undefined. The pattern a⁰ = 1 suggests 1, but the pattern 0ⁿ = 0 suggests 0, and the two disagree. Calculators report it as undefined or an error.

Try it yourself

Put the method into practice with the matching calculator.

Open the Scientific Calculator

Related guides