How to Add and Subtract Fractions

A fraction describes a part of a whole using a numerator (the top) and a denominator (the bottom). To add or subtract fractions they must share a common denominator, because you can only combine quantities measured in the same-sized pieces.

Multiplication and division are simpler — they do not need a common denominator — but the result should still be simplified to its lowest terms.

Open the matching Fraction Calculator

Key formula

a/b ± c/b = (a ± c)/b • a/b × c/d = (a×c)/(b×d) • a/b ÷ c/d = a/b × d/c

Adding and subtracting with a common denominator

The simplest common denominator is the product of the two denominators. To add 1/2 and 1/3, multiply the first fraction by 3/3 and the second by 2/2 so both have denominator 6: 3/6 + 2/6 = 5/6. Subtraction works the same way — just subtract the numerators once the denominators match.

Using the lowest common denominator (the least common multiple of the denominators) keeps the numbers smaller, but the product always works too. The Fraction Calculator handles this for you and shows the rewritten fractions in the steps panel.

Multiplying and dividing fractions

Multiplication is the easiest fraction operation: multiply the numerators together and the denominators together, so 2/3 × 4/5 = 8/15. No common denominator is needed.

Division multiplies the first fraction by the reciprocal of the second: 2/3 ÷ 4/5 = 2/3 × 5/4 = 10/12, which simplifies to 5/6. The reciprocal of a fraction is obtained by flipping it — swap the numerator and denominator.

Simplifying and mixed numbers

After any operation, reduce the result to its lowest terms by dividing the numerator and denominator by their greatest common divisor (GCD). The GCD of 10 and 12 is 2, so 10/12 becomes 5/6. Any negative sign is kept on the numerator for consistency.

When the numerator is larger than the denominator, the fraction is "improper" and can be written as a mixed number. 7/4, for example, is 1 3/4 — one whole plus three quarters. The Fraction Calculator shows the exact fraction, the mixed number and a decimal approximation together.

Turning mixed numbers into single fractions

A mixed number such as 2 1/5 means 2 + 1/5, not 21/5. Convert it before calculating: multiply the whole number by the denominator and add the numerator, so 2 × 5 + 1 = 11 and 2 1/5 = 11/5. Skipping the multiplication is why some “simple” problems come out far too small.

To go back, divide. 11 ÷ 5 is 2 with remainder 1, which is 2 1/5. The remainder is the new numerator; the denominator does not change.

Worked example

Calculate 1/2 + 1/3

  1. 1Find a common denominator. The product 2 × 3 = 6 works.
  2. 2Rewrite each fraction over 6: 1/2 = 3/6 and 1/3 = 2/6.
  3. 3Add the numerators, keeping the denominator: 3/6 + 2/6 = 5/6.
  4. 4Check for simplification: GCD(5, 6) = 1, so 5/6 is already in lowest terms.

Answer: 5/6

Another worked example

Calculate 2 1/4 − 5/6

  1. 1Convert the mixed number: 2 1/4 = (2 × 4 + 1)/4 = 9/4.
  2. 2A common denominator of 4 and 6 is 12. Rewrite 9/4 = 27/12 and 5/6 = 10/12.
  3. 3Subtract the numerators: 27 − 10 = 17, so the difference is 17/12.
  4. 417 and 12 share no divisor greater than 1, so the fraction is already simplified. As a mixed number it is 1 5/12.

Answer: 17/12, which is 1 5/12

How to read the result

The simplified fraction is the exact answer. The mixed number is the same value written so it can be read aloud (“one and five twelfths”). The decimal may be rounded and may not terminate. If a later step needs the result, carry the fraction, not the rounded decimal.

A negative sign is kept on the numerator. −3/4 and 3/−4 are the same number; normalising the sign stops two equal results from looking different.

Limits of this method

A zero denominator is undefined, not “a very small fraction”. If a word problem produces one, the setup is wrong. The calculator stops instead of returning a huge number.

The tool combines two fractions at a time. For a longer sum, feed the exact result of the first pair into the next step. Rounding to a decimal between steps throws away the exactness you just worked for.

Common mistakes

  • Adding numerators and denominators separately — 1/2 + 1/3 is not 2/5. You must use a common denominator first.
  • Forgetting to simplify — 10/12 is correct but not in lowest terms; it simplifies to 5/6.
  • Dividing by zero — a denominator can never be zero, because division by zero is undefined.
  • Cross-multiplying when you should just multiply across — for 2/3 × 4/5, multiply tops and bottoms directly to get 8/15.

Frequently asked questions

Do I need a common denominator to multiply fractions?

No. To multiply, just multiply the numerators together and the denominators together. A common denominator is only needed for addition and subtraction.

What is an improper fraction?

A fraction whose numerator is larger than its denominator, such as 7/4. It can be rewritten as a mixed number: 7/4 = 1 3/4.

Why can the denominator not be zero?

Division by zero is undefined — there is no number that "zero parts of something" can meaningfully represent. The calculator rejects a zero denominator with a clear message.

Should the next step use the decimal shown beside the fraction?

Only if an approximation is acceptable. 1/3 is not exactly 0.33. Keep the fraction when the problem asks for an exact answer.

How do two negative fractions add?

Add the sizes and keep the negative sign. −1/2 + −1/3 = −5/6. Subtracting a negative is the same as adding the positive value.

Try it yourself

Put the method into practice with the matching calculator.

Open the Fraction Calculator

Related guides