How Percentages Work

A percentage is a fraction out of 100. The word literally means "per hundred", so 25% means 25 out of every 100, or 0.25 as a decimal. Converting between percentages and decimals is the key to every percentage calculation.

Once you can convert a percentage to a decimal (divide by 100) and back (multiply by 100), the rest is arithmetic. The Percentage Solver handles all eight common question types in one place and shows the working for each.

Open the matching Percentage Solver

Key formula

X% of Y = (X ÷ 100) × Y • % change = ((new − original) ÷ original) × 100

Percent of a number, and "is what percent"

To find "X% of Y", convert X% to a decimal by dividing by 100, then multiply by Y. So 20% of 150 = 0.2 × 150 = 30. To find "X is what percent of Y", divide X by Y and multiply by 100: 30 is 30 ÷ 150 × 100 = 20% of 150.

These two are inverses of each other. If you know the percentage and the whole, you find the part; if you know the part and the whole, you find the percentage.

Percentage change, increase and decrease

Percentage change measures how much a value has grown or shrunk relative to where it started. The formula is ((new − original) ÷ original) × 100. A result above zero is an increase; below zero is a decrease. Always divide by the original value, not the new one.

Adding or subtracting a percentage is just multiplication by a factor. Adding 15% to 200 is 200 × 1.15 = 230. Subtracting 15% is 200 × 0.85 = 170. This is faster and less error-prone than calculating the percentage and then adding or subtracting it.

Reverse percentage

Reverse percentage recovers an original amount when you only know the final value and the percentage change. If a price after a 20% discount is $80, the original is not $96 — that would apply the discount to the wrong base. Instead, $80 represents 80% of the original, so the original is $80 ÷ 0.8 = $100.

The rule: if the final value is P% of the original, then original = final ÷ (P ÷ 100). For a discount, P = 100 − discount; for a markup, P = 100 + markup.

Chaining a discount and a tax

Write each change as a multiplier. A 25% discount is × 0.75. An 8% tax charged afterwards is × 1.08, and it applies to the discounted price, not the original. The combined factor is 0.75 × 1.08 = 0.81, a 19% reduction — not “25 minus 8”.

Stacked discounts work the same way. 20% off and then 10% off is × 0.80 × 0.90 = × 0.72, a 28% reduction, not 30%. The second discount is taken from a smaller price.

Percentages greater than 100 and less than 1

A percentage is just a number out of 100, so values above 100 are perfectly normal. 150% of 80 is 1.5 × 80 = 120 — the result is larger than the base because the percentage exceeds the whole. A quantity growing from 40 to 100 has increased by 150%.

Small percentages work the same way. 0.5% is 0.005 as a decimal, so 0.5% of 8000 = 0.005 × 8000 = 40. The conversion does not change; only the decimal shifts. A common slip is treating 0.5% as 0.5 instead of 0.005.

Worked example

A $50 item is increased by 20%. What is the new price, and what is the percentage change from the original?

  1. 1Convert 20% to a decimal: 20 ÷ 100 = 0.2.
  2. 2Find the increase: 0.2 × 50 = 10.
  3. 3Add to the original: 50 + 10 = 60. (Equivalently, 50 × 1.20 = 60.)
  4. 4Percentage change = ((60 − 50) ÷ 50) × 100 = (10 ÷ 50) × 100 = 20%.

Answer: New price $60; a 20% increase.

Another worked example

A jacket listed at $80 is discounted 25%, then charged 8% sales tax. What do you pay?

  1. 1Discounted price: 80 × 0.75 = 60.
  2. 2Tax is charged on 60, not on 80: 60 × 1.08 = 64.80.
  3. 3Combined factor check: 0.75 × 1.08 = 0.81, and 80 × 0.81 = 64.80.
  4. 4Subtracting the percentages (25 − 8 = 17) would suggest 80 × 0.83 = 66.40, which overcharges because it applies the tax idea to the wrong base.

Answer: $64.80

Another worked example

A price rises from $40 to $100. What is the percentage increase?

  1. 1Identify original = 40, new = 100.
  2. 2Change = 100 − 40 = 60.
  3. 3Percentage change = (60 ÷ 40) × 100 = 1.5 × 100 = 150%.
  4. 4The result exceeds 100% because the new value is more than double the original — a valid outcome, not an error.

Answer: 150% increase

How to read the result

A percentage change always names a starting value. The same rise of 20 units is a 100% increase from 20 and a 10% increase from 200. State the base, or the percentage cannot be checked.

Percentage points and percent change answer different questions. A rate moving from 4% to 5% has risen by 1 percentage point and by 25% relative to where it started. Mixing those two statements is how headlines become misleading.

Limits of this method

Percentage change is undefined when the original value is 0, because the formula divides by that original. Describe “from 0 to 40” as a change in amount, not as a percentage increase.

Successive percentage changes do not add. A 10% rise followed by a 10% fall does not return to the start: 100 × 1.10 × 0.90 = 99. Multiply the factors; do not add and subtract the percentages.

Common mistakes

  • Dividing by the new value instead of the original when calculating percentage change — always divide by the original (starting) value.
  • Adding the percentage back on for reverse percentage — a $80 item after a 20% discount came from $100, not $96.
  • Forgetting to convert the percentage to a decimal — 20% of 150 is 0.2 × 150 = 30, not 20 × 150.
  • Confusing percentage points with percent change — a rise from 10% to 15% is a 5 percentage-point increase, but a 50% relative increase.

Frequently asked questions

How do I convert a percentage to a decimal?

Divide by 100. 25% becomes 0.25. To convert a decimal back to a percentage, multiply by 100.

What is the difference between percentage increase and percentage change?

Percentage change can be positive (increase) or negative (decrease). Percentage increase specifically refers to a positive change from the original value.

How does reverse percentage work?

If the final value is P% of the original, divide the final value by (P ÷ 100) to recover the original. For a 20% discount, the final is 80% of the original, so divide by 0.8.

Why does a 50% increase not get undone by a 50% decrease?

The two percentages use different bases. 100 increased by 50% is 150. Decreasing 150 by 50% removes 75, not 50, so you land at 75.

Can a percentage be greater than 100%?

Yes. A percentage is a number out of 100, so 150% means 1.5 times the base. A value that more than doubles has grown by more than 100%.

How do I recover a pre-tax price?

Divide by the tax factor. A total of $54 that includes 8% tax came from 54 ÷ 1.08 = $50. Subtracting 8% of 54 gives 49.68, which is too low.

Try it yourself

Put the method into practice with the matching calculator.

Open the Percentage Solver

Related guides