Averages: Mean, Median and Mode

An average is a single number that summarises a set of values. There are three common averages — the mean, the median and the mode — and they answer slightly different questions, so the right one depends on the data and on what you want to know.

The mean is what most people call the average: add up the values and divide by how many there are. The median is the middle value when the data is ordered. The mode is the value that appears most often. They can give very different answers on the same data, especially when a few values are much larger or smaller than the rest.

Open the matching Grade Calculator

Key formula

Mean = (sum of values) ÷ (count of values) • Median = middle value of the ordered list • Mode = most frequent value

The mean: the balance point

The mean is the sum of the values divided by the count. For 4, 8, 15, 16 and 23, the sum is 66 and the count is 5, so the mean is 66 ÷ 5 = 13.2. It is the balance point of the data: if the values were weights on a beam, the mean is where the beam would balance.

The mean uses every value, which is its strength and its weakness. A single very large or very small value pulls the mean toward it. The mean of 4, 8, 15, 16 and 230 is 54.6, which describes none of the first four values well — one outlier dragged the balance point away from the cluster.

The median: the middle value

The median is the middle value once the data is ordered. With an odd count it is the single middle value: for 4, 8, 15, 16, 23 the median is 15. With an even count it is the mean of the two middle values: for 4, 8, 15, 16 the median is (8 + 15) ÷ 2 = 11.5.

The median ignores how far the extreme values sit; it only cares about their order. That makes it robust to outliers. Add 230 to the list above and the median moves from 15 to just 16, because the new value is at one end and does not shift the middle. Income and house-price statistics are usually reported as medians for exactly this reason.

The mode: the most frequent value

The mode is the value that appears most often. For 3, 5, 5, 7, 8 the mode is 5. A data set can have more than one mode if two values tie for most frequent (bimodal), or no mode at all if every value appears once. The mode is the only average that works for non-numeric categories — the most common shoe size or car colour is a mode.

The mode is most useful for discrete, repeated data. For a small set of distinct measurements it tells you little, because nothing repeats. For survey responses or sizes it is often the most informative average.

When the mean and median disagree

On symmetric data the mean and median sit close together. On skewed data they pull apart, and the direction of the gap reveals the skew. A mean above the median points to a few large values stretching the right tail; a mean below points to a few small values on the left.

This is why house prices and incomes are reported as medians. A handful of very high values lifts the mean well above what a typical member earns, while the median — the middle value — stays anchored among the majority. Reporting the mean alone would overstate the typical case.

Worked example

Find the mean, median and mode of 6, 8, 8, 10, 28.

  1. 1Mean: sum = 6 + 8 + 8 + 10 + 28 = 60. Count = 5. Mean = 60 ÷ 5 = 12.
  2. 2Median: the list is already ordered, so the middle (third) value is 8.
  3. 3Mode: 8 appears twice and every other value once, so the mode is 8.
  4. 4Notice the mean (12) is pulled up by the 28, while the median and mode (both 8) sit in the cluster. This is a skewed set.

Answer: Mean 12, median 8, mode 8.

Another worked example

A class scores 55, 60, 62, 65 and 98 on a test. Compare the mean and median, and explain the difference.

  1. 1Mean: (55 + 60 + 62 + 65 + 98) ÷ 5 = 340 ÷ 5 = 68.
  2. 2Median: the ordered middle value is 62.
  3. 3The mean (68) is six points above the median (62) because the single score of 98 pulls the balance point upward.
  4. 4The median better reflects the typical student, since four of the five scores cluster in the fifties and sixties.

Answer: Mean 68, median 62. The mean is pulled up by the outlier score of 98.

How to read the result

The mean, median and mode agree on symmetric data and disagree on skewed data, so the size of the gap between them is itself a quick measure of skew. If the mean is well above the median, the data is right-skewed by a few large values; if below, left-skewed by a few small ones.

A weighted mean — where some values count more than others — is the bridge to the Grade Calculator. A course grade is a mean in which each assignment percentage is weighted by its category. The same arithmetic applies; only the weights differ.

Limits of this method

The mean and median describe only the centre, not the spread. Two data sets with the same mean can be tightly clustered or wildly spread out. Always pair a measure of centre with a measure of spread (such as the range) before drawing conclusions.

The mode is unstable in small samples. A value appearing twice in a sample of five is the mode by chance, not because it is genuinely most common. The mode is meaningful only when the data has genuine repetition, such as sizes, ratings or categories.

Common mistakes

  • Reporting the mean for skewed data without mentioning it — a few outliers can make the mean misrepresent the typical value. Use the median for income, prices and other skewed data.
  • Forgetting to order the data before finding the median — the median is the middle of the sorted list, not the middle of the list as given.
  • Assuming there is always a mode — if every value appears once, there is no mode. A tie produces two modes, not no mode.
  • Averaging the mean and median — they measure different things. Pick the one that answers your question; do not blend them.

Frequently asked questions

Which average should I use?

Use the mean when the data is fairly symmetric and you want the balance point. Use the median when the data is skewed or has outliers. Use the mode when you want the most common value, especially for categories.

Why is income reported as a median, not a mean?

Because a small number of very high incomes pull the mean well above what most people earn. The median — the middle income — is less affected by those outliers and better reflects the typical earner.

Can a data set have two modes?

Yes. If two values tie for most frequent, the data is bimodal. If every value appears once, it has no mode.

Why do the mean and median give different answers?

Because the mean uses every value and is pulled by outliers, while the median only uses the middle of the ordered list. On skewed data they disagree; the size and direction of the gap reveal the skew.

Which average should a course grade use?

Usually a weighted mean, where each assignment percentage is weighted by its category. The Grade Calculator computes this. The median is rarely used for grades because it ignores how much each assignment was worth.

Try it yourself

Put the method into practice with the matching calculator.

Open the Grade Calculator

Related guides