Working with Negative Numbers

A negative number is a value less than zero, written with a leading minus sign. They describe temperatures below freezing, debts, depths below sea level and any quantity measured in the opposite direction from a chosen zero. The rules for combining them are simple, but the signs trip people up because subtraction and negation use the same symbol.

The key is to separate two roles of the minus sign. Between two numbers it means subtraction; in front of a single number it means “the opposite of”. Once you treat “subtract a negative” as “add the opposite”, most of the confusion disappears.

Open the matching Basic Math Solver

Key formula

a + (−b) = a − b • a − (−b) = a + b • (−a) × (−b) = a × b • (−a) × b = −(a × b)

Adding and subtracting with signs

Adding a negative number is the same as subtracting its positive opposite: 5 + (−3) = 5 − 3 = 2. Think of it as moving left on the number line. Adding a positive moves right; adding a negative moves left by the same amount.

Subtracting a negative number is the same as adding its positive opposite: 5 − (−3) = 5 + 3 = 8. Two minuses next to each other cancel — “take away a debt” is the same as “receive that amount”. This double-negative rule is the single most common source of sign errors, so write the cancellation explicitly before calculating.

Multiplying and dividing signed numbers

For multiplication and division, the sign of the answer depends on how many negative factors there are. An even number of negatives gives a positive result; an odd number gives a negative result. So (−2) × (−3) = +6, while (−2) × 3 = −6. Division follows the same sign rule: (−12) ÷ (−4) = +3.

A quick way to remember it: “same signs give positive, different signs give negative”. This works for any number of factors — count the negatives, and if the count is even the answer is positive, if odd it is negative.

Distributing a minus sign across brackets

A minus sign or negative coefficient in front of brackets applies to every term inside: −(a + b) = −a − b, and −(a − b) = −a + b. The minus flips the sign of each term. This is why −(x − 3) becomes −x + 3, not −x − 3 — the second term’s sign changes too.

A coefficient works the same way: −2(x + 4) = −2x − 8. Multiply each term inside by the coefficient, and carry the negative sign onto each product. Missing the second term is the most common distribution error, so check that the number of terms after distributing matches what you started with.

Why the double negative cancels

Subtracting a negative is adding because subtraction is defined as adding the opposite. a − b means a + (−b), so a − (−b) means a + (−(−b)) = a + b. The two negations undo each other. This is a consequence of the definition, not a separate rule to memorise.

The same logic explains why multiplying two negatives gives a positive. Multiplication by −1 reverses the sign, so multiplying by −1 twice reverses it twice — back to the original sign. (−2) × (−3) = (−1) × 2 × (−1) × 3 = (−1) × (−1) × 6 = +6.

Worked example

Calculate −5 − (−8) + (−2) × 3

  1. 1Handle the double negative first: −5 − (−8) = −5 + 8 = 3.
  2. 2Multiply (−2) × 3. Different signs give a negative: −6.
  3. 3Add the two parts: 3 + (−6) = 3 − 6 = −3.
  4. 4Check the sign count: one negative factor in the multiplication, so the product is negative, which matches −6.

Answer: −3

Another worked example

Simplify −3(x − 5) − (4 − 2x) and evaluate at x = −2.

  1. 1Distribute −3 across the first brackets, flipping each sign: −3x + 15.
  2. 2Distribute the minus across the second brackets: −(4 − 2x) = −4 + 2x.
  3. 3Combine: −3x + 15 − 4 + 2x.
  4. 4Gather like terms: (−3x + 2x) + (15 − 4) = −x + 11.
  5. 5Evaluate at x = −2: −(−2) + 11 = 2 + 11 = 13.

Answer: −x + 11, which is 13 when x = −2.

Another worked example

A bank account is at −45 (overdrawn). A $20 fee is charged, then a $90 deposit clears. What is the balance?

  1. 1Start at −45. The fee makes it more negative: −45 + (−20) = −65.
  2. 2The deposit adds 90: −65 + 90 = 25.
  3. 3Check the sign: a larger deposit than the overdraw, so the result is positive, which matches +25.

Answer: The balance is +25.

How to read the result

A signed result is correct only if both the magnitude and the sign are right. The magnitude comes from the ordinary arithmetic; the sign comes from counting negative factors or from the double-negative rule. Check the two separately, because a wrong sign on an otherwise correct magnitude is the most common signed-arithmetic error.

The number line is the reliable mental model. Adding moves right, subtracting moves left, and a negative input reverses the direction you would have moved for its positive opposite. When a sign feels uncertain, trace the moves on the line rather than reasoning about symbols alone.

Limits of this method

Division by zero is still undefined when signs are involved. (−6) ÷ 0 is not “negative infinity”; it has no value. A zero divisor stops the calculation regardless of the signs of the other numbers.

These rules are for real numbers. Square roots of negative numbers lead into complex numbers (for example √(−1) = i), which the Basic Math Solver does not evaluate. The Quadratic Equation Solver handles complex roots when they arise from a quadratic.

Common mistakes

  • Treating −5 − (−8) as −13 — two minuses together cancel, so subtracting a negative is adding: −5 + 8 = 3.
  • Forgetting that multiplying two negatives gives a positive — (−2) × (−3) = +6, not −6.
  • Distributing a minus to only the first term — −(x − 3) is −x + 3, not −x − 3.
  • Confusing the minus as subtraction with the minus as negation — the symbol is the same, but “5 − 3” and “5 + (−3)” are the same calculation written two ways.

Frequently asked questions

Why do two negatives make a positive?

For multiplication, an even number of negative factors gives a positive result. (−2) × (−3) = +6 because the two negatives cancel. For subtraction, −(−3) = +3 because “take away a debt” is the same as receiving the amount.

Is −3² the same as (−3)²?

No. −3² means −(3²) = −9, because the exponent binds before the unary minus. (−3)² squares the whole −3, giving +9. Parentheses decide whether the negative is inside the squaring.

How do I distribute a negative coefficient?

Multiply every term inside the brackets by the coefficient, flipping each sign. −2(x + 4) = −2x − 8. Check that the term count after distributing matches what you started with.

Is “minus minus five” always plus five?

In arithmetic, yes: −(−5) = +5. But read the context. “5 − (−5)” is 5 + 5 = 10, while “−5 − 5” is −10. The two minuses must be adjacent and both acting as negation for the cancellation to apply.

Why does a negative times a negative equal a positive?

Multiplying by −1 reverses the sign. Doing it twice reverses the sign twice, returning to the original. So (−2) × (−3) = (−1 × −1) × 6 = +6.

Try it yourself

Put the method into practice with the matching calculator.

Open the Basic Math Solver

Related guides